Steps for Replacing a Metal Rousseau Mailbox Lock: 1. Gather Your Tools: You will typically need the following tools: A replacement lock (make sure it matches the model of your mailbox). A screwdriver (usually a flathead or Phillips screwdriver). A wrench or pliers (if necessary). Lubricant (optional, for smooth operation). 2. Remove the Old Lock: […]
If you’re looking to verify or address an issue with a leaking oil door closer, here’s a general approach to handle the situation: Steps to Verify a Leaking Oil Door Closer: Check for Visible Oil Leaks: Inspect the door closer closely for any visible signs of oil leakage. The oil may be leaking from the […]
Serious code violation — both from a fire safety and building code standpoint. Let’s break it down: 🚨 Situation Recap: You’re dealing with a back exit door in Quebec that has: ❌ A stuck latch on the exit device (panic bar or paddle). ❌ An illegal double deadbolt installed (likely requiring a key from inside […]
You’re dealing with a broken spring on a push paddle (panic/push bar) device. That’s a common issue, especially in high-traffic commercial doors. Here’s a breakdown of what you need to know and do: 🔧 What Happens When the Spring Breaks? The paddle stays loose or doesn’t return to position after pressing. The latch doesn’t retract […]
In Quebec, exit doors are subject to specific rules under the National Building Code (NBC) as adopted and modified by the Quebec Construction Code (Code de construction du Québec – Chapitre I, Bâtiment). These rules are meant to ensure safe and quick egress in case of emergency. Those old days were acceptable please check if […]
The ECL-230D is an exit alarm lock, and if the alarm keeps ringing, here are some possible causes and solutions: 1. Check if the Door is Fully Closed Make sure the door is completely closed and that the latch is fully engaged in the strike plate. A door that doesn’t close properly can keep the […]
Montreal Baldwin mortise – Serrure Baldwin Mortaise a Montreal If your old Baldwin mortise lockset is stuck, here are a few troubleshooting steps to get it working again: 1. Check for Mechanical Obstructions Remove the lock faceplate and inspect for any debris, dirt, or broken parts inside the mortise case. Possible mortise casette screw cover […]

Recent Comments

No comments to show.

Categories